Today's Crazy Daily Deal @ dFd
dFd Special: Set of 22" Unfinished Maple Bass Drum Hoops
Set of 22" 6 ply hard maple wood bass drum hoops, 1.5" wide (40mm). It has thicker plies and is equivalent to a 12 ply hoop, about 3/8", and is the standard thickness of a bass hoop. This is a set of hoops (2...
83 Units in Stock Daily Deal Price: 49.99Our Regular Price: $69.56 You save: $19.57 (28%)
Set of 22" 6 ply hard maple wood bass drum hoops, 1.5" wide (40mm). It has thicker plies and is equivalent to a 12 ply hoop, about 3/8", and is the standard thickness of a bass hoop. This is a set of hoops (2...
83 Units in Stock Daily Deal Price: 49.99
Drum Stand And Throne Replacement Parts
Replacement parts for all of the stands and thrones.
 2A100002CRdFd 8mm Replacement Wing NutDrum Factory Direct's replacement 8mm wing nut will fit on to any cymbal stand with 8mm thread. This wing nut is an exact replacement for the TM002... Our Price: $0.92You save: $5.07 (85%) |
 2A100001CRdFd Heavy Duty Contoured 8mm Replacement Wing NutDrum Factory Direct's heavy duty contoured replacement 8mm wing nut will fit on to any cymbal stand with 8mm thread. Features a contoured design for... Our Price: $1.39You save: $4.60 (77%) |
 3H060010dFd High Quality 5/8" Thick Cymbal Felt, 3H060010dFd high quality cymbal felt. It has a 1 1/4" diameter, is 5/8" thick, and has a 10mm diameter hole for use on both 8mm and 6mm cymbal... Our Price: $1.13You save: $3.37 (75%) |
||
 3H060005dFd High Quality Cymbal FeltdFd high quality cymbal felt. This cymbal felt is similar to the DW DWSP2239. It has a 1 3/8" diameter, is 3/4" thick, and has a 10mm... Our Price: $1.79You save: $3.21 (64%) |
 G16AE017Zildjian Gen16 Cympad Washer SetMade from Neoprene for soft, vibration-absorbing cushioning and protection against metal-on-metal contact. The pack includes two thin cymbal washers,... Our Price: $9.95You save: $9.10 (48%) |
 DFDCFdFd 1/2" Thick Cymbal Felt, SingleSingle 1/2" thick cymbal felt. This felt has an 8mm center hole but can work with 6mm posts, too. The diameter is 1 1/2". Our Price: $0.99You save: $3.00 (75%) |
||
 DFDCF2dFd 1/2" Thick Cymbal Felts, 2 Pack1/2" thick cymbal felts, 2 pack. These felts have an 8mm center hole but can work with 6mm posts, too. The diameter is 1 1/2". Includes 2... Our Price: $1.49You save: $5.00 (77%) ... [click here] to select options and add to cart  To be notified when this product is back in stock please click here. |
 DFDCF10Bulk dFd 1/2" Thick Cymbal Felts, 10 Pack1/2" thick cymbal felts, 10 pack. These felts have an 8mm center hole but can work with 6mm posts, too. The diameter is 1 1/2". Includes 10... Our Price: $5.99You save: $10.00 (63%) ... [click here] to select options and add to cart To be notified when this product is back in stock please click here. |
 RB010Pearl Basket Arm Rubber Sleeve For Snare Drum Stand Basket, RB010Pearl replacement basket arm rubber tip sleeve for snare drum stand baskets. The RB010 has a 5/8" opening to slide on to the metal snare basket.... Our Price: $3.49You save: $1.10 (24%) |
||
 2D060008RWdFd Replacement Hi Hat Seat CastingDrum Factory Direct replacement hi-hat seat plastic casting without tilter adjustment screw. Made from durable composite construction, the dFd hi hat... Our Price: $1.92You save: $4.08 (68%) |
 DWSP730DW Clamp Screw For Cymbal Stand Tube Joint,Top Tier, DWSP730DW replacement clamp screw with wing nut, washer, bolt, and spring for 9700 series cymbal stand top tier tube joints. Our Price: $6.19You save: $1.80 (23%) |
 DWSP729DW Clamp Screw For Drum And Cymbal Stand Tube Joint, Bottom Tier, DWSP729DW replacement clamp screw with wing nut, washer, bolt, and spring for 8000 and 9000 series drum and cymbal stand bottom tier tube joints. Our Price: $6.19You save: $1.80 (23%) |
||
 DWSP415DW Cymbal Seat Assembly, DWSP415DW cymbal seat assembly. The DWSP415 attaches to the metal tilter post and includes the seat, top and bottom cymbal felts, built in sleeve, and wing... Our Price: $34.19You save: $10.80 (24%) |
 DWSP728DW Washer For Drum And Cymbal Stand Tube Joint Wing Nut, DWSP728DW replacement washer for tube joint wing nuts on DW 5000, 8000, and 9000 cymbal and percussion stands. The DWSP728 goes between the tube joint and... Our Price: $1.49You save: $0.50 (25%) |
 DWSP119DW Wingnut Spacer For 9900 Stands, DWSP119DW replacement wingnut spacer for 9900 series tom stands and mounts. Includes one spacer per pack. Our Price: $5.29You save: $1.70 (24%) |
||
 SC-CS6MMGibraltar 6mm Cymbal Sleeves, 4 Pack, SC-CS6MM4 pack of replacement 6mm cymbal sleeves by Gibraltar. Fits most older cymbal stands. Our Price: $4.07You save: $3.92 (49%) |
 SC-CS8MMGibraltar 8mm Cymbal Sleeves, 4 Pack, SC-CS8MM4 pack of replacement 8mm cymbal sleeves by Gibraltar. Our Price: $4.07You save: $3.92 (49%) |
 SC-CFS/4Gibraltar Short Cymbal Felts, 4 Pack, SC-CFS/44 pack of 1/2" thick cymbal felts by Gibraltar. These felts have an 8mm center hole but can work with 6mm posts, too. The diameter is 1... Our Price: $4.07You save: $3.92 (49%) |
||
 SC-SNAGibraltar Swing Nut Add On Attachment For 8mm Diameter Tilter, SC-SNAGibraltar Swing Nut Attachment for 8mm diameter cymbal stand tilters. The SC-SNA is a single unit that screws on to an existing 8mm cymbal stand... Our Price: $22.62You save: $21.37 (49%) |
 SC-CFL/4Gibraltar Thick Cymbal Felts, 4 Pack, SC-CFL/44 pack of 1" thick cymbal felts by Gibraltar. These felts have an 8mm center hole but can work with 6mm posts, too. The diameter is 1 3/8". Our Price: $5.09You save: $4.90 (49%) |
 PDAC341PDP Rubber Foot For Stands And Thrones, 3 PackPack of three (3) rubber feet for Pacific Drums stands and thrones. The opening on the foot is 5/8" by 9/32". Our Price: $9.19You save: $2.80 (23%) |
||
 DC580APearl 1" Chrome Stop Lock Memory Lock, DC-580APearl chrome plated stop lock for 1" diameter hardware. The DC580A works with the Pearl H-1000, H-2000 hi hat stands and the D-1000SPN drum... Our Price: $8.28You save: $2.06 (20%) |
 FLW005Pearl Bottom Reversible Foam/Felt Cymbal Stand Washer, FLW005Pearl half felt, half foam cymbal stand washer. The FLW-005 felt/foam washer designed to be used on the bottom side of the cymbal and measures 1... Our Price: $8.74You save: $2.75 (24%) |
 SC121Pearl Clamp Bolt For D1000 Throne, SC121Pearl replacement clamp bolt for D1000 Roadster thrones. Our Price: $1.19You save: $0.80 (40%) |
||
 NP69/2Pearl Cymbal Sleeve 2-Pack, NP69/2Pearl 2 pack clear plastic cymbal sleeves. The NP-69/2 are 2 clear plastic cybal sleeves designed to protect your cymbals from key holing and... Our Price: $2.87You save: $2.12 (42%) |
 FLW001/2Pearl Cymbal Stand Felt Washer, 2 Pack, FLW001/2Pearl felt washers for cymbal stands. The FLW-001/2 felt washers are for cymbal stands and measure 1 3/8" in diameter and 1" tall. Our Price: $4.22You save: $3.78 (47%) |
 FE17Pearl Hi Hat Felt Washer, FE17Pearl felt washer. The FE-17 felt washer is for hi hat cymbal stands. Our Price: $2.92You save: $1.08 (27%) ... [click here] to select options and add to cart To be notified when this product is back in stock please click here. |
||
 PJB55Pearl PJB55 Pipe Joint Bushing With Metal Piece For DJ55 Stand Joint AssemblyPearl pipe joint bushing with metal piece for DJ55 die cast stand joint assembly. The outer diameter of the insert portion is 13/16". The inside... Our Price: $1.59You save: $0.40 (20%) |
 ME209APearl Replacement Spike With Rubber Tip For PS85 Bass Drum Stabilizer Or PPS-20 Cowbell Foot Pedal Attachment, ME-209APearl replacement spike with rubber tip. The ME209A is the spur that fits the PPS-20 cowbell foot pedal bracket. It also can be used as a replacement... Our Price: $2.39You save: $0.60 (20%) |
 FLW006Pearl Top Reversible Foam/Felt Cymbal Stand Washer, FLW006Pearl half felt, half foam cymbal stand washer. The FLW-006 felt/foam washer designed to be used on the top side of the cymbal and measures 1... Our Price: $5.05You save: $1.84 (27%) |
||
 ZSLEEVESZildjian Rubber Cymbal Sleeves, 3 Pack, ZSLEEVES3 pack of replacement 6mm cymbal sleeves by Zildjian. Prevents metal on metal contact between the cymbal and the stand, which can lead to key holing... Our Price: $4.92You save: $4.03 (45%) |
 SC-19AGibraltar Tall Cymbal Sleeve With Flanged Bass, 8mm, 4 Pack, SC-19AThe Gibraltar SC-19A is a flanged bass cymbal sleeve designed for tall cymbal tilters. They come 4 per pack and fit 8mm threaded cymbal stands. Our Price: $5.09You save: $4.90 (49%) |
 SC-19BGibraltar Short Cymbal Sleeve With Flanged Bass, 8mm, 4 Pack, SC-19BThe Gibraltar SC-19B is a flanged bass cymbal sleeve designed for shorter cymbal tilters. They come 4 per pack and fit 8mm threaded cymbal stands. Our Price: $5.09You save: $4.90 (49%) |
||
 SC-20AGibraltar Rubber Cymbal Seat For Tall Cymbal Tilters, SC-20AGibraltar SC-20A cymbal sleeve includes a rubber-flanged base attached to a long sleeve and top rubber-flanged seat. The SC-20A fits 8mm tilters and... Our Price: $5.09You save: $4.90 (49%) |
 SC-20BGibraltar Rubber Cymbal Seat For Short Cymbal Tilters, SC-20BGibraltar SC-20B cymbal sleeve includes a rubber-flanged base attached to a short sleeve and top rubber-flanged seat. The SC-20B fits 8mm tilters and... Our Price: $5.09You save: $4.90 (49%) |
 SM012Pearl 7mm x 21" Hi-Hat Upper Pull Rod, SM-012Pearl upper pull rod for most current hi-hat stands. The SM012 is 7mm diameter and 21 inches long. Replaces the ME145 which is now obsolete. Our Price: $5.52You save: $1.37 (20%) |
||
 CT83Pearl Center Tube Assembly For C830 Cymbal Stand, CT83Pearl center tube assembly for the Pearl C830 double braced straight cymbal stand. Our Price: $24.19You save: $8.00 (25%) |
 SM012SPearl Standard Hi-Hat Upper Pull Rod 7mm X18", SM012SPearl upper pull rod. The SM012S has a standard 7mm diameter and is 18 inches long. Replaces the ME145S which is now obsolete. Our Price: $6.63You save: $1.41 (18%) |
 SC-HHRSGibraltar Hi-Hat Pull Rod Standard Thread, SC-HHRSThe Gibraltar Hi-Hat pull rod can be used as a replacement pull rod for hi-hat stands that use the standard threading. Our Price: $11.21You save: $10.78 (49%) |
Featured Products
|
|
|
||||||||
|
|
|
||||||||
